Used Forklifts Northwest Territories - There are some advantages and disadvantages to utilizing both internal combustion (IC) and electric trucks. Electric engines need less maintenance, and hence they cost less to maintain over their lifetime. The battery should last five years minimum if the manufacturer's maintenance and charging guidelines are followed. Overnight charging costs are generally low. Electric trucks tend to be compact units and very maneuverable, specially the types with three wheels. Drive, tilt, lift, auxiliary and acceleration speeds are adjustable and could be changed depending on the use and the driver's preferences. Electric trucks are easier on the natural environment and are not noisy. Not suitable to be used in wet conditions are electric trucks. Due to the need for battery recharging, they cannot be used continuously. They are not suited to rough terrain. The energy consumption is high on ramp work and continuous high lifts. Best to be continuously used outdoors and on surfaces which are uneven is the advantage of an IC engine diesel/LPG. With no need for battery charging, the forklift could be utilized during the evening and overnight. Supply and transport of fuel should be factored into expenses. Initial costs are less than for an electric truck, but long term costs connected to fuel and maintenance are higher. IC engines have larger capacities than electric, but less adaptability. LPG could be used in some indoor applications. IC Engine diesel/LPG produces more noise and higher emissions compared to electric. LPG has lower emissions than diesel. Electric lifts produce no exhaust, that makes them the machine of choice for indoor applications where air quality is a problem. Electric forklifts are quiet and clean. They are twenty to forty percent more expensive to buy than IC lifts, but the operating cost of electric models on a per hour basis is less. The downside is that batteries need 16 hours to charge and cool down, so buying an extra set of batteries is recommended. Electric lifts are not limited to indoor application, but when used outdoors they should be utilized cautiously. Internal Combustion forklifts have a higher carrying capacity compared to electric forklifts and are usually used for outdoor applications. If your fleet normally runs on one type of fuel, it may be a good choice to purchase an IC unit which uses the same kind of fuel. They could function on propane, diesel or gas. Diesel is the most economical. IC forklifts have the advantage of being less expensive to operate and easy to refuel; nonetheless, their per-hour cost to operate is higher. Most IC models cannot be used indoors. Since 1986, Caterpillar has transformed into a household name within the manufacturing of construction and mining equipment, industrial gas turbines, diesel-electric locomotives, diesel engines and natural gas engines. Caterpillar has many products that are available under the subsequent brands: CAT, Caterpillar, FG Wilson, Perkins, SEM, Progress Rail, EMD, Solar Turbines, MWM, and MAK. Caterpillar specializes in numerous industries including Construction, Energy & Transportation, Resource Industries and financial solutions, along with a variety of operating divisions. A vast dealership network spanning 190 countries all around the globe organizes the majority of the fleet. All Toyota machinery and parts manufactured within North America adhere to the International Organization for Standardization or ISO 14001 standard. TIEM has been honored many times for its commitment to persistent development, and its environmental systems. It is the first and only manufacturer to offer EPA and CARB-certified Compressed Natural Gas powered lift trucks on the market. For instance, the Toyota 8-Series IC lift vehicles emit 70 percent less smog forming emissions than the existing centralized EPA standards and have complied with California’s strict emission standards and policies. Jungheinrich is now amongst the leading suppliers of lift trucks, material flow technology and warehouse technology throughout the world. They rank 1st within Europe for system technology. The company offers a comprehensive product assortment of material handling equipment and rack systems along with services from a manufacturing logistics service provider. Jungheinrich is the 3rd largest supplier of lift truck trucks used for the materials handling industry. They realized their remarkable growth due mostly to their technological innovations and quality lift truck designs. They have developed a host of ergonomic and productivity enhancements for their fleet and introduced a proprietary 3-phase AC motor and controller technology. Jungheinrich has more than 300 service and dealer facilities strategically located throughout Mexico, Canada and the USA. The company is proud to simplify your material handling needs by providing customized solutions. Jungheinrich offers a vast line of forklifts which function remarkably in a variety of applications. These equipment are well-suited to complete jobs in a diverse setting. They can complete order picking, food processing, stacking and warehousing applications with ease.
Omega: Omega 4 Wheel Drive Forklifts Northwest Territories - Symbols of Dependability & Strength Omega's numerous all-terrain 4 wheel drive lift truck models have earned a solid reputation based around the machinery's raw power and great durability. These kinds of machinery have been developed with the intent to set higher goals, break industry standards and the desire to maintain and achieve complete superiority. The 4 wheel drive or all-terrain series provided by Omega is not like any other with innovative design and engineering. The company utilizes technologically advanced electrical systems and sophisticated hydraulics. These systems are developed with the latest technology and state of the line tools. These equipment are capable of working in extreme settings where dependability and ruggedness are only as important as the overall lift capacity. The combined concept behind the Omega 4 wheel drive lift trucks are based on strength and simplicity. What's more, these forklifts offer many other features and benefits that set them apart from the rest of the makers within the industry. These types of machines have various distinctive features. The company's experience in the heavy machine industry has enabled these kinds of machines to include the advantage of low maintenance within a range of the machinery. Innovative Rough Terrain Equipment Omega Lift far surpasses the basics of designing and making tough Rough Terrain Machinery. The corporation additionally puts a huge focus on both service and support. We provide complete service packages for all of your machine requirements. From rentals and parts and service, we even provide the actual transportation of the machinery. Whatever you need, we have the capacity to accomplish it. Bottom Line, its' All About Value and Time 4DML Series - The all-wheel drive Omega Lift 4D Multi-Loader is also offers 4-directional, all-wheel brake and all-wheel steer features. This truck can also perform multi-duty as a sideloader, a traditional lift truck and a 4-directional reach truck. In addition to handling pallets, long loads are able to be maneuvered through tight aisles and narrow doorways leading to more storage. ARM Series - The ARM Series is a versatile telescopic handler that could be utilized in a variety of applications. With proportional hydraulic controls, a really powerful powertrain, and a solid steel frame, this particular unit is available with many desirable basic features. A wide variety of attachments are also offered for this Omega Lift series of equipment. These attachments make transform equipment into multi-use models and possibly save the company thousands of dollar as they could invest in a particular type of attachment to complete additional tasks compared to a totally different machine.
Potain: Potain Construction Cranes Northwest Territories - The company Potain is a leading manufacturer of construction cranes. Manitowac is a particular brand that offers cranes for the building construction business. Some of the ranges and service news regarding Potain cranes include: crane operators training courses, tower cranes, building site reference, second-hand cranes, and crane equipment innovations, amongst numerous other things. In today's global marketplace, there are so many different realities. Today's customers no longer accept the "one-size-fits-all-solutions" for their work applications. Manitowoc is dedicated to helping all their customers meet all their highly particular and varied needs. The company is completely structured to be able to suit the diverse needs for different tasks and regions in order to serve their broad client base. Potain manufactures a wide variety of equipments such as: Grove mobile hydraulic cranes, Manitowoc-lattice boom crawler cranes, Potain tower cranes are services and National Crane telescoping cranes, built and sold at numerous locations on 5 various continents. In order to maximize functionality and value, practically all Manitowoc products are designed and built as modular base models that have the capacity of for add-on components that can be added on in order to maximize their performance. Lastly, each product has been engineered with features which suit all the needs of various regions. For example, they provide simplicity, in addition to reliable and efficient performance in the harshest of settings as well as suit all the requirements of global transportation regulations. To be able to help their clients facilitate acquiring the right type of equipment, Manitowoc Finance offers many affordable financing options for their customers in order to be able to tackle lucrative new opportunities when they occur. Furthermore, when their clients are in the field, Manitowoc's Crane Care offers comprehensive service packages. They are available to assist and have professional repair and diagnosis available at your side. All maintenance is performed by skilled local representatives who speak the native language of where help is being called from. These professionals have the ability and knowledge to return your equipment to profitable operation with a short amount of downtime.
JLG: JLG Articulated Manlifts Northwest Territories - Man lifts come in both electric models and engine-powered models There are different types of lifts obtainable for small spaces. These specially designed machines could rise 36 feet and extend 21 feet. There are outdoor lifts existing on the market which offer a rise of more than 140 feet and a 69-foot horizontal reach. The electric man lift is another popular family of lifts. Electric models are used almost exclusively inside and on smooth surface flooring. Usually these have a slim body style in order to allow access into narrow areas. The engine-powered man lifts usually run on gas, diesel or propane. These units are mostly used for outdoor jobsites and for heavier applications. The electric man lift is best suited for indoor environments and are excellent options for warehouses. This is due to the fact that man lifts come in various sizes, the majority are small enough to fit in tight spaces, fit through doorways, and could traverse barriers or blockages, while producing to air pollution. They usually help to maximize space on high shelving units and can reach overhead work areas with ease. Certain units of electric lifts can complete targeted and extremely precise maneuvers by using a rotating platform. The electric drive uses rechargeable batteries which usually can be recharged overnight. Numerous companies buy extra batteries so that downtime is minimized and there could be an extra battery charging at all times to be switched out at once when needed. Articulating man lifts which are engine powered can be designed to perform on many kinds of terrain. Many of these models have been equipped with legs which can raise the lift body off its wheels. This creates a more secure and steady platform. Other models are particularly made for both rough and uneven ground. Most of these lifts are capable of handling 500 lbs. In some cases, several models could raise a 600 lb. cargo. This model can articulate 69 feet out in any direction and reach over 140 feet high. The booms could transport a worker to a work site. Once there, the operator can maneuver the equipment to have it work over or under a particular place. Man lifts designs are as varied and broad as their applications. There is an extensive range of articulating lifts existing on the market. These lifts are engineered to meet practically every application, situation and circumstances. One manufacturer designed lifts specifically for dangerous settings like for instance petro-chemical plants, underground tunnels and grain-processing plants. These types of lifts are suitable for working in environments where there is a risk of explosive gases or dust during ordinary or extraordinary operations.
Terex: Terex Boom Lifts Northwest Territories - Articulating Booms - Bi-Energy and Electric Terex provides Bi-Energy and Genie DC equipment which are emission-free and provide quiet operation for the most sensitive work applications. For instance, in industrial settings where the equipment needs to travel large distances, the Genie bi-energy system combines the benefits and versatility of a diesel fueled generator using a 48 Volt DC machine. Important characteristics which this combination provides is out, up and over positioning capabilities for complete versatility. Also, the zero tail-swing provided by most models, combined with the tight turning radius provides easy maneuvering through standard doors and narrow aisles. The drive and proportional controls provide the equipment with precise boom positioning and smooth drive performance. For emission free and quiet operation suitable for sensitive settings, there is a 48V DC electric drive system. There are jib boom models on the market to function with an extra working range for particular tasks. On non-jib models, there is a self-leveling platform that rotates ninety degrees to either side. Articulating Booms - Diesel Engine The Terex Genie is great for outdoor construction applications and industrial applications. This model offers engine-powered articulating Z booms that combine extreme lifting versatility and out, over and up positioning capabilities. The outreach provided by this particular type is the best in the market. The diesel engines with articulating booms provide zero tail-swing on most models and have a tight turning radius. These machines are great for maneuvering in confined locations. Moreover, they provide excellent torque, terrain and grade maneuverability and utmost power. The diesel engines are generally quiet also. Most models have full time drive positive drive traction system and active oscillating axle to offer great flexibility on surfaces which are uneven and rough. High ground clearance is offered in 4 or 2 wheel drive models, whilst the rough terrain models are desirable for any company's fleet. The jib boom kinds are available and offer extra range capabilities. On non-jib models, the self-leveling platform also rotates to 90 degrees on these models too.
Jungheinrich: Jungheinrich Reach Forklifts Northwest Territories - One can find a range of different ways that raise or lower lifts on a lift truck: rack and pinion lifts, scissor lifts, screw lifts, telescoping lifts and articulated lifts. Scissor lifts employ crisscrossed folding supports with a screw mechanism used to draw the members together. Rack and pinion lifts utilize a pinion, that is a small drive gear, to drive a straight-toothed rack to raise the cargo. The telescoping lift mechanism is designed with many sections that retract and extend into and out of each other to achieve lifting action. Screw lifts use threads to raise the lift. Articulated lifts use a mechanism that involves many parts which unfold or articulate. An example of an articulated lift is the "cherry picker." Lift truck Material Handling There are a lot of reasons to keep up with innovations in material handling processes. Material handling methods and the tools could be utilized to deal with increased geographical coverage, additional SKUs, and the requirement to lower inventories. Machines which are well ahead of the technological curve could help productivity maximization and increase effectiveness. Forklift Battery & Charging Technology The newest innovations on electric lift trucks have yielded longer run-times and higher capacities than ever before, which makes the choice to convert from the traditional IC lift truck over to the improved electric units. Charger and battery combinations are offering much more power for much longer periods than older systems were capable of accomplishing. Enhancements in both charger and battery technologies are not only making electric forklifts more beneficial but they are making it possible to have more environmentally friendly warehouse operations. These new batteries are called Li-ion batteries or Lithium-Ion batteries. This technology is still quite new, however Li-ion batteries show remarkable promise. They are not only smaller but are capable of holding up to six times the charge of standard lead acid batteries. Li-ion batteries have very low maintenance needs and are able to maximize opportunity charging through zero memory technology.
Snorkel: Snorkel Scissor Lifts Northwest Territories - Scissor lifts use a platform upon a scissor-like mechanism in order to raise and lower workers. This machine is only made to lift vertically. The apparatus which is responsible for raising and lowering the scissor lift is made from folding and linked supports that are designed in an x-shaped or crisscross pattern pattern. The platform propels in a vertical manner by applying pressure to the outside of the lowest set of supports, causing upward motion by elongating the crossing pattern. The stroke, width, capacity and length or scissor lift are the most common product specifications. The distinction between the equipment's fully lowered and completely elevated position is referred to as the stroke. The longest dimension of the platform is referred to as the length. Capacity is the maximum force or load supported by the scissor lift. The narrowest dimension of the lift is referred to as its width. On the market there are an array of different types of scissor lifts. Some options include dock lifts, personnel lifts, vehicle lifts, pallet trucks and table lifts. Utility carts or containers are rectangular or round devices which have wheels. These equipment items are used in general purpose instances and normally seen in bulk material transport. Dock lifts refer to the particular scissor lifts that raise and lower workers or materials onto and off of loading docks. Table lifts are utilized to position and raise items for ergonomic access. Personnel lifts are utilized to lift and lower individuals to heights so they could accomplish certain tasks or store materials et cetera. Pallet jacks or pallet trucks are trucks or carts that are equipped with forks designed to engage pallet slots. Scissor lifts are most commonly utilized as lift tables and as personnel lifts, they can be built into pallet jacks. In industrial settings, lift tables are chosen for lifting and positioning loads and materials. Personnel lifts are a part of the aerial lift kind. Man lifts are a different facet of aerial lifts which consist of cherry pickers, mobile elevated work platforms or MEWP and bucket trucks.
Hyundai: Hyundai Lift Trucks Northwest Territories - Providing excellent comfort and quality are the Hyundai Electric and IC forklift trucks. Some of the top priorities in the machine design include safety and high durability. There are more than 70 different models of Hyundai Forklifts available. They range in production from 1.5 ton up to the 16 ton Flexilift. Customers have a wide variety of material handling machinery options to pick from. There is a specific kind of lift truck available to perform basically any warehouse application. Hyundai Electric Forklift Trucks Offering an environmentally friendly and non-polluting alternative is the Hyundai Electric forklift. These kinds of lift trucks have improved energy efficiency options. They offer a great asset to any workplace. The ergonomic design of the AC control BT series provides various safety features such as: High visibility for safe operation, Hi-Tech Zapi Controller providing low and high voltage overheating and fault recording. The Duel Rear Tires and Anti-roll back system provide better stability and control during lifting as well. The Self Diagnostic LCD Monitor is a great system that alerts for operation errors, and gives information about system faults and the battery level. The series also provides an Adjustable Suspension Seat for greater comfort and safety. Last of all, the increased mast tilting angle is another good feature. Geography The AC forklift is suitable for general warehouse use. If you are looking to utilize forklifts to use inside of your warehouse operation, counterbalanced lift trucks are a good option. These forklifts are suited for retail distribution, indoor warehousing applications, building material distribution and food processing and manufacturing operations. For various kinds of applications that include general warehousing, both the electric narrow aisle and narrow aisle lift trucks are a great choice. Large distribution warehouses and food distribution centres would find these types of lift trucks useful, as does any place that needs access to storage facilities and high stacking. A walkie pallet truck is best suitable for general warehousing use, department stores and loading dock areas. For storage and general warehousing, tuggers and tow tractors is another good option. You must first know your business needs before purchasing a forklift. What's more, you must know specifically the type of application and environment you would be using the machinery on. This would help assure that you choose a model that would suit all your requirements and you will be very happy with the outcome.
Kalmar: Kalmar Counterweight Forklifts Northwest Territories - Suggestions for Buying Forklift Parts There are some things that might want to know about prior to thinking about purchasing parts for your forklift. Some of the things, they might not tell you otherwise, thus it is a good idea to learn about what those tips are so that you can save yourself some time and money in the long-run. You should determine the size of equipment you would need, when you go searching for a machinery. This will enable you to concentrate on your needs and will save you wasted time spent on machinery which offer you less value. It is easy to guesstimate and accidentally jump the gun when you need a specific part, thus, you should know which forklift unit you have and what things it needs. There is a huge variety of locations that sell components for lift trucks, so make sure to do some research to find out all the best options for you. Taking the time to compare prices ahead of time would prepare you for how much you are going to need to spend and get you ready to purchase the equipment and components. Do some price comparisons to see which stores are offering the best prices, because replacement parts are usually costly. The lift truck is a high maintenance machine which is worked hard. In order for the unit to run efficiently and safely, it is vital to invest in replacing broken and worn out components as soon as they are discovered. Some individuals even shop on the World Wide Web and look for the availability and best pricing that way. There may be a variety of areas within your vicinity carrying these components and pricing out ahead of time would save you from driving all over town. Find somebody who specializes in your specific kind of equipment, if you are not certain as to the components you need. They would likely be able to teach you about what components you need. Ask around with people with the same lines of business regarding where and whom they go to have maintenance done and shop for parts. If you really have no body to speak with directly, you can always look on blogs and read where others go.
Mitsubishi: Mitsubishi Big Forklifts Northwest Territories - Lift truck operators are usually on the trucks more than 7 out of 8 hours per day in several forklift corporations. Operators would be asked to always unload and load trucks the whole day. Many of these operators do not have to consult with supervisors very often, nor do they have to deal with paperwork. Sometimes they are doing the same job during the shift for the duration and they don't even have to move the forks to adapt to various cargo. These operators normally find the forklift counterbalance sit-down units more comfortable and effective. Several warehouse facilities have tons of room for forklifts to maneuver and operate in. In these situations, an engine powered or 4-wheel electric lift truck remains a key player in the warehousing fleet. Other facilities are crammed to capacity on the other hand with limited space for forklift maneuverability. These facilities can have staging areas and shipping departments to work out of. In this particular case, a stand-up end control or a 3-wheel electric lift truck model can appear to be a better option. Depending on your particular use and setting you are working in, you can then determine how to select the correct truck and select the correct tire. Next is a brief profile to show you the kind of tire choices available. Cushion Tire Trucks - The cushion tire has been specifically designed for use on both concrete or asphalt surfaces. More commonly, they are specified for indoor work inside warehouses, manufacturing facilities and distribution centers. Typically cushion tire forklifts are smaller compared to similar capacity pneumatic units; thus, they are commonly cheaper. This makes their resale value a lot lower also. Pneumatic Tire Trucks - Pneumatic tire trucks can go indoors in addition to out on improved surfaces. These surfaces consist of hard-packed dirt or stones and blacktop. Rough terrain areas such as severely plowed fields or potholed lots are not ideal. The trucks are outfitted with a larger frame. Normally, pneumatic tire trucks are more pricey compared to cushion tire models. With regards to resale, generally the pneumatic models provide higher value. This is in part due to the huge amount of maneuvering space they offer and their overall surface versatility.
MEC: MEC Aerial Lift Platforms Northwest Territories - A lot of the products offered by MEC are well-built and unique within the material handling business. Their global distribution dealer network helps its partners stand out from their competitors. MEC proudly offers various specialty products which are not available anywhere else in the globe. Combining this with the fact that MEC brand has an excellent reputation for quality and performance. The brand has defined themselves over the years as bringing quality and competitiveness to the material handling market. In recent years, they have included numerous items to the market, making MEC a leader within the industry. MEC has introduced a variety of popular new products that are easy to maintain and well-built. These things consist of new products for end users to perform both unusual and commonplace tasks on the jobsite, along with numerous environmental products. They supply a variety of rental businesses all around the globe in order to provide more versatility to their customers and help them become more profitable. In recent years, MEC has expanded their Aerial Work Platform line greatly, which continues the Mayville Engineering standard of high quality. For instance, in 2006, MEC's product line started to include the TH80, the TH60 and 2 new telehandler models. By the year 2008, the company included telescopic booms to their product line. A year later, MEC track-drive booms series debuted on the market during 2009. The MEC electric rough terrain mid-size scissor lifts are a company priority passing another milestone for the business. This started with the 72ES Series and later grew to include the 84ES Series Speed Level Sigma Lift series. The 91ES Series scissor lifts came into being in 2009. This scissor lift features a large deck and is an electric rough terrain machinery. It is good to know that all 3 series are available in diesel and in duel fuel options too.
Yale: Yale LP Forklifts Northwest Territories - There are specific kinds and classes of forklifts existing on the market. When you have become familiar with the numerous units, it is easier to understand you lift truck application needs prior to choosing one. It is essential to know what types of tasks you will require the forklift for and what precisely you want the lift truck to carry out for you. Like for instance, would the lift truck be utilized outdoors or indoors? Would you prefer an electric unit or an internal combustion engine or ICE unit? If an ICE model is the preferred choice, the next factor should be whether to buy gas, liquid propane or diesel. One more consideration to make is to know whether or not a new or second-hand model is the best choice for all your needs. To be able to make the right purchase, it is necessary to narrow down what precisely you require from your forklift. Also, knowing these preferences would really help the dealer offer the right match for your application requirements. There really are a few key factors to think about prior to purchasing. The main considerations would normally comprise the lift truck capacities and lift heights. Will the operators be using the equipment to wrap and place cargo? Working in confined spaces? Filling out any kind of paperwork? Will they be picking up debris? Would the operators need more visibility? Are the lift trucks outfitted with the correct tools or attachments to get the task done correctly? This last question is a good idea to check into if you are currently working with a fleet as well. Yale closely monitors their electrical and natural gas usage to guarantee wise management of energy consumption. The efficient energy management greatly reduces pollen, helping make their operations really cost competitive because they try to reduce their carbon footprint wherever possible. Like for example, they use energy efficient LED lights for task and overhead lighting and with their sensors in order to eliminate extra energy consumption. Yale uses certain measures in order to re-use energy rather than to simply reducing energy consumption. Their plant within Berea, Kentucky has been undergoing the renovations and methods in recent years to get rid of electric boilers, air conditioners and natural gas heaters. As an alternative, the plant is able to re-use the heat produced in their internal painting methods.
Manitou: Manitou Telescopic Forklifts Northwest Territories - The telescopic lift trucks on the market provided by Manitou are among the most versatile machines within the business. These equipment each come standard with 4-wheel drive and are designed to be used in outdoor settings, and in rough terrain environments. The lift capacities vary from 35,000 pounds to 3000 pounds. The machinery are capable of lifting heights ranging up to 70 feet on some units. All models come with different steering modes such as 4-wheel steering and crab steering. Several of the other alternatives available for these models include frame leveling, outriggers and Hydrostatic transmissions. These types of machines could also use a huge range of attachments like for instance: buckets, truss jibs, rotating carriages, fixed carriages, grapples, and winches. There is a huge assortment of telescopic lift trucks available on the market and therefore, many various configurations. Be certain to do your research so as to select the best one for your specific application. There are several particular things to always take into consideration when dismounting a forklift. Like for example, when dismounting, be sure to face the vehicle and never jump off of it. Maintain a 3-point stance, that means to consistently have one foot and both hands or vice-versa in contact with the machinery. Be sure to wear oil resistant and non slippery shoes since proper protective shoes can definitely help to keep you safe. Do not wear loose clothing or dangling jewelry, because these items might become caught. Wear the correct type of clothes. Make sure the area surrounding the forklift and the floor is free of debris or fluid which can potentially cause a dangerous slip. Finally, be alert and make sure there is no other traffic around when you are preparing to dismount.
Comansa: Comansa Construction Cranes Northwest Territories - There is a variety of Linden Comansa Cranes available. They provide a different modular design of their structural parts, making this family of cranes able to provide particular benefits over competitors. Their cranes offer a modular concept that enables their clients to modify the cranes to deal with certain jobs without adding new components. This ground-breaking technology makes pre-existing models a lot more adaptable and overall the production costs are significantly lessened. The layout of the plant is particularly designed to enable the pieces to follow an optimized work flow. This process permits specialization and automation of every work station and helps to reduce production time. All of these practices equate to a more efficient productivity and much greater work capacity. Linden Comansa's Modular Flat-Top Cranes are top of their class and are the most modern cranes on the market these days. They offer a lot more dependability, flexibility and durability than their competition. These cranes have more capacity. The company is committed to offering their customers with the most innovative solutions together with their constant product development. Staying committed to providing their customers with the best options in the field is amongst the driving forces of the evolution of Linden Comansa. Maintaining they stay a step ahead within the industry has allowed them to remain among the top Technological Leaders within the field. In 1978, Linden produced 8000 Modular System technology. Ever since the acquisition of that technology, Linden Comansa has been focused on just developing the Flat-Top concept for their equipments. The company has dedicated more than 30 years to developing and manufacturing the most efficient and effective tower cranes within the business.
Genie: Genie Rough Terrain Scissor Lift Northwest Territories - Genie's four-wheel drive rough terrain scissor lifts are ideal for outdoor use. They provide enhanced work site efficiency and productivity while also providing the user great lift speed, great platform size, and excellent handling able to get the most difficult jobs effectively. Genie electric self-propelled scissor lifts are able to be used for many work site applications outdoors on solid, level ground. Genie electric scissor lifts are quiet and produce low-emission levels, making them really ideal for being used in sensitive locations like for instance hotels, schools, shopping malls and offices. Genie's scissor lifts may be the perfect machinery for performing tasks that need more operating space for supplies, tools, and employees. For GS-3384 units and higher, a rear slide out extension deck could be added as an option. Basic on all RT units is a multi-position slide out extension deck on the front. To utilize electric power tools, there is power supplied to the platform. Employees could reach loads on heights as much as 11.75 meters with the GS-3232. Genie machines are built to be compact and small in an effort to provide great handling. On all models, front wheel drive is basic. To maneuver in confined areas, even crowded construction sites, narrow aisles and elevators, most units have a zero inside turning radius. The GS-3232 unit could fit through spaces only 81 centimetres wide. Even though these machines are engineered to be both compact and efficient, the Genie RT scissor lifts provide the ability to effectively move over uneven, rough ground. Positive traction control, four-wheel drive, and 50 percent gradeability help machines operate efficiently on slopes. So that tasks get more efficiently with less machinery down-time, Genie's rough terrain scissor lifts offer its users many unique features.
Taylor: Taylor Rough Terrain Forklift Northwest Territories - Rough Terrain Forklift Training Commonly used on construction sites and on logging and forestry projects, Rough terrain or Class VII forklifts is a popular option for many outdoor conditions which need a machine to run on uneven ground. The Occupational Safety and Health Administration or OSHA states that drivers should receive classroom style training or lecture combined with supervised driving training. Regular refresher training programs should be taken by the drivers so as to keep them in top form. Classroom or Lecture Training The first step is taking instruction in a classroom or lecture style. Training consists of the necessary information about the equipment that the operator will be working with. Details like for example how to refuel the lift truck and lifting capacities are talked about. Safety tips are really important to understand before operation. OSHA does not place a minimum time requirement on classroom training, however, they do state that oral and written exams may be part of the training process. Supervised Driving The next step in rough terrain lift truck training involves supervised driving, similar to when somebody learns to drive a passenger car. The operator has to learn how to drive the specific type of rough terrain lift truck that they will drive in the workplace. Also, they need to practice operating this forklift in an environment which closely replicates the conditions in which they would be driving. Several of the other conditions covered in training include dealing with vehicle traffic, pedestrians and nearby structures. Certification The supervisor could certify the operator for that workplace after a supervisor determines whether an operator is capable of safely driving a rough terrain forklift. The certification for the operator could be kept in their personnel file. If the training is to be taken in a 3rd party training facility, the trainer hands the driver the certification. As work environments vary, the certifications are not transferable; hence, operators need to be re-certified again in the new environment. Usually, training passes more quickly after the driver has been certified the first time. The safety issues connected with driving a lift truck are really important. It is important that operators stay alert and drive with utmost attention and care. Practicing good habits can save lives at the end of the day. Additionally, much less damage to the work environment, the equipment itself or the goods occurs when drivers are working at the top of their game.
JCB: JCB Aerial Lifts Northwest Territories - Aerial Work Platforms AWP or aerial work platforms are designed and engineered to raise employees and their tools to a certain height in order to finish a job. The particular unit and manufacturer and type of machine all varies. Before aerial work platforms were developed, all jobs that need work at high levels had to be done with scaffolding. Hence, the invention of aerial work platforms has kept many employees safe and increased the overall productivity of similar jobs. There are 3 key types of aerial work platforms. They are scissor lifts, boomlifts and mechanical lifts. These kinds of machinery are able to be operated with pneumatics, mechanically using a rack and pinion system or with screws or by hydraulics. These units may be self-propelled with controls at the platform, they may be unpowered models needing an external force to move them or be mounted to a vehicle so as to be transported. John L. Grove was an American inventor and industrialist who is widely credited to creating the aerial work platform. Nonetheless, in the year 1966, prior to the very first unit of JLG, a company known as Selma Manlift introduced an aerial lift unit. John L. Grove and his wife decided to take a road trip in 1967. This was after selling his previous business Grove Manufacturing. They decided to make a stop at Hoover Dam. While the couple was there, Grove unfortunately saw 2 workers electrocuted while they were working on scaffolding. This tragic incident led John Grove to discover an untapped market for a new product which can lift employees safely in the air for them to do construction and maintenance jobs in a better way. When John returned home from his vacation, he bought a small metal fabrication business and formed a partnership along with 2 friends. They immediately started designing ideas for the aerial work platform. The new business was called JLG Industries Inc. They proudly launched their first aerial work platform during the year 1920 with the aid of 20 employees.
Komatsu: Komatsu Counterbalance Forklift Northwest Territories - Counterbalance forklift Training The Occupational Safety and Health Administration does require drivers utilizing a counterbalanced lift truck to have received lecture style or classroom training. They additionally require that a supervised driving course is completed in addition to periodic refresher training. There is no required minimum time for the supervised driving or classroom training. Moreover, there is no frequency mandated for the refresher training either. Counterbalanced Forklifts A counterbalanced forklift balances its load with the truck's weight. The forks on a lift truck are in a fixed position; they go up and down and do not pivot. The forks run parallel to the body of the forklift. OSHA require that drivers who would be using counterbalanced forklifts on the job be trained on the trucks while being in the kind of setting that they would be using them. Classroom Training Classroom training or lecture style training provides information regarding the truck which the operator will be driving. This training covers aspects like weight and load capacity, height, how to fuel or charge the lift truck. It includes how to gauge the time on the engine as well as any lift truck specific safety information including where to stand when walking around the truck. Either written and/or oral testing is part of the classroom training. There is no minimum time requirement for the training. Supervised Driving The lift truck driver has to learn how to use the counterbalanced lift truck while being supervised. The supervised driving has to take place in a place which reflects the environment the operator will be driving in. This atmosphere must include the kind of terrain she will be traveling on, have similar surrounding structures close by, and similar pedestrian and vehicle traffic close by too. There is no required minimum number of hours the operator has to drive while being supervised.
Haulotte: Haulotte Boom Lifts Northwest Territories - Company Profile The material handling corporation, the Haulotte Group is best recognized for its heavy industrial machines used in distributing and manufacturing settings. Their extensive services and sales are through a subsidiaries network. They provide a huge range of over 60 different types so as to meet the needs of all their clients. Several of their popular pieces of machinery include: Event seating and staging, Earth moving equipment, Utility and system scaffolds, Tele-handlers and Access equipment. In the field of transport and material handling, the Haulotte Group brings more than 100 years of expertise. Since December 3, 1998, the Haulotte Group has been quoted on the Paris Stock Exchange. Worldwide Player, Haulotte Group's Business Model Covers: The company's business model aims to be both successful and flexible in their manufacturing operations. They pride themselves on being diverse and capable of adapting to the demand and fluctuations in specific market conditions. Haulotte Group provides a distribution network that is based in 20 subsidiaries. They have numerous offices situated in strategic markets in over 100 countries providing coverage, which are supported by a distributor network. The company has an additional rental business in order to produce additional activity and help propel their brand into particular geographical markets. This helps Haulotte Group be better positioned to be able to help assess the needs of end-users. The rental business offers a great way for clients to become familiar with the products before investing in them. Industries: Haulotte Group provides 7 various product ranges in order to meet and exceed the clients' needs from a variety of businesses like: airports, manufacturing, logistics, maintenance and the retail sector amongst others. Haulotte Group provides its clients flexible and successful manufacturing operations capable for adapting to the fluctuations in demand for certain market conditions. Presently, Haulotte Group provides six production units that could provide the top product solutions to their partners.
Combi Lift: Combi Lift Side Loader Forklift Northwest Territories - The Combilift company was established by two engineers, Robert Moffett and Martin McVicar. Between them, they had over 40 years of experience in engineering when they founded the business in 1998 in Monaghan, Ireland. In just more than a decade, Combilift became a leader in the worldwide long-load handling market, providing equipment to more than 50 markets all over the world. Supported by a trusted international network of distributors which have helped expand distribution into numerous markets all over the world and using their extensive knowledge and experience, Moffett and McVicar have built products that had sold 10,000 units by mid 2009 and are in high demand. Beneath is a summary of several of the Combilift units. There are a variety of mast options for the C-Series Combilifts, while these equipment provide up to nine meters and lift capacities that top out at 25,000 kilograms. Available engines are in gas or LPG, diesel, and electric or battery and the C-Series Combilifts can work within guided aisles as narrow as 210 centimetres wide. The Combilift Straddle Carriers could move fully loaded containers that could weigh up to 35 tons. These loads can be transported all over a work site or facility and the Combilift Straddle Carrier could lift fully loaded containers where required, whether it be from trailer to trailer, from the trailer to the ground or from the ground to the trailer. These kinds of machinery are an effective, cost effective solution for a lot of haulage, shipping, and distribution businesses, even those with low throughput levels. The SL-Series side-loaders are machinery capable of driving in four directions because of its multi-directional steering. This hydrostatic, all-wheel drive forklift could help businesses in a lot of ways, one of which is to enable facilities to have narrower aisles. It also enables the capability to bulk or block stack by driving forward. This extremely manoeuvrable truck is often considered to be a better choice as opposed to many conventional sit-down sideloaders due to the various additional features and capabilities.
Daewoo: Daewoo LP Forklifts Northwest Territories - How to Read a Forklift LP or propane Bottle Gauge There are essential safety reasons for forklift drivers to know how to read a propane bottle gauge on a forklift. The driver has to know when the forklift is running low on gas. Some older forklift models are designed so that the forks lower slowly to the ground and the machine automatically shuts off when the vehicle is out of fuel. This is really not sage and could lead to product damage and personal injury. Newer models are designed differently to prevent this from happening. The driver can operate a handle which stops the forks from falling when the propane runs out. 1 Know where the propane gauge is located. The gauge looks a lot like the gas gauge on an automobile. It is a small round object situated either on the dash of the forklift where the controls and rest of the gauges are situated or on the valve on the propane tank. 2 Make sure to always keep the gauge cover clean so that information behind the glass is readable. 3 Look for the indicator needle at the bottom of the gauge. This needle will show you how much fuel is still inside the propane tank. 4 There are two letters on the gauge: E for empty and F for full. When the needle arm points at the letter E, it would mean that the propane tank is totally empty. When the needle arm arrives at the letter F, it would mean that the propane tank is completely full. 5 Notice the line in the middle of the gauge. When the needle arrives at the halfway line it would mean that the tank is half full of propane. 6 Normally, there are smaller lines midway between the halfway lines. These lines indicate quarters. When the needle points at the quarter mark nearest the F, it means there is three-fourths of a tank remaining. When the needle points at the quarter mark closest to E, the tank is a quarter full.
Toyota: Toyota LP Forklifts Northwest Territories - Propane cylinders take up little space and they could be kept either inside of a storage area or outside of a facility. It does take some time to switch out a propane cylinder, although, it still does requires operator training in order to be conducted safely and also require knowledge of safety standards like for example the Occupational Health and Safety Administration or OSHA. IC trucks are easier and faster to refuel, compared to electric trucks, but the internal combustion or IC engines produce major air-polluting emissions and are extremely noisy. NARROW-AISLE LIFT TRUCKS The ITA's Class 2 trucks consist of a large variety of electric forklifts and these are specially made to be used in narrow aisles. The regular storage aisles are 12 feet wide, and this easily enables a counterbalanced lift truck to turn in the aisle and put a load away. Usually, narrow aisles are 8 feet wide, whereas the very narrow aisles are about 5.5 to 6 feet wide. These narrow aisles need specialized lift trucks that can put away cargo without any turning at all or that are small enough to turn on a tight radius. The three most common narrow aisle forklifts are the order pickers, reach trucks and turret trucks. The differences amongst these forklifts are discussed below. Narrow-Aisle Reach Forklifts The traditional reach truck is the original narrow-aisle forklift and these machinery do not need a counterweight. They are also small enough to turn around in narrow aisles. Instead, stability is provided by the outrigger arms that extend in front of the trucks. Nonetheless, depending on the storage configuration, these outrigger arms can prevent the forklifts from getting near enough to the storage rack to deposit and retrieve loads. To be able to overcome this specific situation, a pantograph was designed. The pantograph is a reach truck which is made with a telescoping mechanism. This enables forks to easily and concisely reach into storage locations. The best environment for narrow aisle forklifts is a place that has good lighting, clean floors and good traffic flow, well-maintained floor, along with sufficient turning space. These machines have changed the material handling industry. Toyota stands behind their devotion to giving very strong machinery and exceptional quality. As the company changes, they continually strive to apply solutions in order to offer their diverse customer base with the best products available.
