Use a Pneumatic Forklift
You can often find pneumatic forklifts in shipping and warehouse operations. Also called pallet trucks or pump trucks, they are used in order to transport materials and products around on wooden pallets utilizing metal forks mounted on a wheeled counterweight. The counterweight contains a pump which raises the forks off the ground. A pallet truck is intended to be operated by a single individual.
Pallet trucks should be operated carefully to prevent loss of control while lifting heavy loads. Equipment must be inspected prior to operating. Clear the wheels area of any obstacle. Check that the handle could turn smoothly. The pallet must be stacked carefully to be able to guarantee that nothing will fall off during transportation.
On the end of the pallet truck's handle, squeeze the level found on the inside of the metal loop to be able to lower the forks and release the air in the pump. The forks could then be pushed into the pallet slots. The forks should be at the center in order to guarantee even distribution of the pallet's weight across them. Raise the forks from the ground by pumping the pneumatic lift's handle until the pallet has completely cleared the ground. Do not lift the pallet very high or the forklift could unbalance.
Pull on the handle and drag it behind you if you want to move the pallet. It is truly not safe to push the pallet in front of you as the momentum could cause it to go out of control. Take turns slowly and don't try to stop suddenly. Stop slowly, squeeze the lever, and the forks would lower to the ground. Lastly, remove the forks from the pallet by pulling them out. Return the pallet truck to its permanent place.