Daewoo IC Forklifts Northwest Territories

Inspect a Forklift
There are over 10,000 workplace injuries connected to forklifts happen every year, based on HRSDC and OSHA reports. A lot of these mishaps are caused by operator error. Lack of appropriate equipment inspection and maintenance causes numerous others. Maintenance and operation of a forklift is not only the reason for personal injuries, but also of property damage. Forklifts can damage overhead pipes, sprinklers and building structures, and other equipment when improperly utilized. The following day by day check ups must be performed so as to reduce the possibility of forklift accidents.

Turn the engine off prior to checking different fluid levels: engine oil, fuel, coolant, brake fluid and hydraulic oil. The tires must be inspected for indications of wear and tear. Check the tire air pressure. Check the condition of the forks. The load backrest have to be attached tightly. Do a visual check of the top-clip retaining heel and pin. Then carry out an inspection of the hydraulic hoses, mast chains, stops and cables. Ensure that the finger and overhead guards are securely attached.

The LP powered forklift has propane tanks that have to be checked for corrosion, damage or rust. The battery's electrolyte levels and charge need to be tested every so often. Seat belts need to be checked for wear and tear. Check to make certain the owner's guidebook is kept on-board the forklift inside a storage compartment. Check the seat belt to make sure the latches are secure. Test the hood latch to ensure it is functioning as it should.

To make certain there are no unusual engine sounds, start the engine up and listen for any irregularities. If there are, investigate promptly. Test the steering controls and the accelerator. The service brake and the parking break must be correctly working.

The tilt control and drive control must be inspected to ensure proper functioning in both reverse and forward. Test the functioning of the lowering control and hoist, and the attachment control. Test the lights and horn. Then check the wipers, heater and defroster to make certain they are working well. Inspect each gauge to ascertain that it is reading within functional limits.

• Mitsubishi Dual Fuel Forklifts Northwest Territories
  Mitsubishi dual fuel lift trucks utilize hybrid technology. These kinds of forklifts remain primarily electric, even though they are utilizing miniature internal combustion engines. The dual fuel units are really preferred by lots of people,... More
• MEC Scissor Lifts Northwest Territories
  Safety Requirements for Scissor Lifts Scissor lift machinery are referred to as "moveable scaffolds," based on the OSHA. These industrial machines are capable of lifting heavy and large loads which are well balanced. They are... More
• TCM Diesel Forklifts Northwest Territories
  It was in the start of the 20th Century when the first lift trucks were launched. These equipment during the past 90 plus years has changed the material handling business and even the recycling industry.... More
• Doosan Used Forklifts Northwest Territories
  The materials handling business Doosan is a major manufacturer of machinery, with more than 100 forklift units manufactured at various Doosan factories. Doosan is Korea's oldest business organization. Models comprise reach trucks and electric and... More
• Haulotte Aerial Work Platforms Northwest Territories
  During 2005, the business Pinguely-Haulotte was renamed Haulotte Group. This name change brought the end of the Pinguely name after 124 years! The Haulotte Group is popular for making telescopic work platforms, articulated work platforms,... More