The outdoor forklifts produced by Mitsubishi have gained a great reputation of working at peak performance. You do nonetheless have to take good care of it and do regular maintenance in order to get the longest life possible from your machinery. If you take good care of your lift truck it would work in an optimum manner and as efficiently and safely as possible. The following suggestions below will help you increase engine life and maintain engine performance.
Pre-Shift or Daily Inspections should be performed: By regularly inspecting all of the fluid levels in the engine, as well as the additional related things described in the Maintenance and Operation Manual of the forklift, you would drastically maintain the longevity and performance of your machinery.
A Planned Maintenance Program or PM should be established and adhered to: A good planned maintenance program will closely follow the maintenance schedule of the engine that the manufacturer has set out. Some of the major things the planned maintenance program includes are replacing the engine oil and appropriate filters regularly.
Implementing an engine oil analysis program is also extremely beneficial. It can help to provide a completely detailed breakdown of all the elements which are present in the oil. For example, abnormally high amounts of silica or metals can indicate there may be a failed part in of the engine. In addition, these findings can indicate that the engine is ingesting dirty air. If these concerns are dealt with and investigated early on, you would really help lessen repair expenses and increase the overall life of the engine.
Check and Change the Air Filter: Weak engine performance or poor fuel economy could be the end result if you overlook to regularly inspect and or replace the air filter inside the engine. For instance, engine life could be drastically reduced if you are working with a restricted air filter that allows unfiltered and dirty air to be pulled into the engine.
The Cooling System has to be Inspected: The life of an engine and its performance could be significantly affected by the cooling system. The engine is designed and engineered to operate in a specific temperature range. Once that range is exceeded, damage can occur to the internal parts of the engine. Frequent maintenance should consist of replacing the engine coolant as well. Failure to perform this type of maintenance could cause damaged engine parts, especially regarding any parts that are made of aluminum.